How to find the right Range Replacement Burners AI guide

What the AI looks for in Range Replacement Burners

Terminal connection

For electric coil elements, match how the old one connects: plug-in terminals that push into a receptacle, or terminals wired or clipped in under a lift-up top. The two styles aren't interchangeable, and this is the most common reason a replacement element won't fit.

Diameter and wattage

Match the old element's diameter (typically 6-inch or 8-inch) and the wattage stamped on it or listed for your model number. An element with the wrong wattage heats differently than the control expects and can overload the receptacle or switch.

Receptacle condition

Inspect the receptacle block before you order. If it is burnt, pitted or melted, replace it together with the element. A damaged receptacle will quickly ruin a new element and is a common cause of arcing.

Gas burner parts

For gas burner heads, bases or sealed-burner assemblies, order by the OEM part number for that exact burner position. Burner ports, orifice fit and igniter alignment are specific to each position and model, and a mismatch affects combustion safety.

Radiant or glass-top elements

Under a glass cooktop, match the element by part number, including ring count (single, dual or triple) and limiter type. These elements are tied to specific controls, so a part that looks like a match may not switch correctly.